Combined Test Solutions in conjunction with Distro Design Ltd provide rugged cable testing systems for the Entertainment and Events industry. We replace conventional PAT testing systems by using the advanced capabilities of the EasyTouch PRO system from Cirris.
We can provide a completely custom system for you based on your application and required connectors. Distro Design have many years of experience building quality Distro’s and we joined forces to provide the best solution to our customer base.
The advantage of using our system over a conventional PAT test system is primarily the test time. We can test cables in milli-seconds, not minutes. One system can provide the same output of three leading competitors PAT systems in the events sector.
Cirris EasyTouch was designed for use in the Aerospace and Motorsport sectors specialising in high voltage testing. It’s not just a PAT tester, it can do way more and can provide customer control over each test.
As standard, the EasyTouch can perform very fast intermittent faults testing. We can test up to 256 points per second. This means that faults can be quickly captured and stored as an intermittent fault. We also have the ability as standard to perform a Kelvin 4-wire measurement to ensure that there is a good quality low resistance reading in the milli-ohm range. If you are not familiar with Kelvin 4-wire, please see the 4 wire testing article that we wrote for further information.
There is a lot of helpful information on the CTS website available in regards to cable testing technical tips
Here is a useful link to explain more about 4-wire testing. Please watch to learn more.