Huntron: Huntron Tracker 2800 plus SW

Tracker 2800 with Workstation SW and Scanning functionality

Categories: , SKU: HUN00012 Tags:


Huntron® Tracker® 2800 with Workstation SW

The Huntron Tracker 2000 for the 21st Century

The 2800 series of Huntron Tracker are designed to complement conventional test instruments in the debug and troubleshooting process. Using the proven power-off test method known as Analog Signature Analysis it eliminates the risk of further circuit damage, which often occurs when power is applied. The Huntron Trackers are suited for todays varied signal circuit cards where Analog and Digital are mixed together.

The Tracker 2800’s features variable range parameters resulting in over 100 combinations of voltage, source resistance and frequency. The 2800 series is a great off-line support tool for the automated Huntron Access Prober diagnostic systems.
The Tracker works by applying a current-limited AC signal across two points of a component. The current flow causes a vertical signature deflection, while the applied voltage causes a horizontal deflection. Together they form a unique V/I signature that represents the overall health of the device under test. Analyzing the signature can quickly determine whether the component is good, bad, or marginal.


• Optional Software Control using Huntron Workstation
• Enhanced Range Selections
• Full Screen Signature Zoom
• Color Touch Screen controls
• Huntron SigAssist® built-in
• Built-in DC Voltage Source for testing gated devices (i.e. SCRs, relays, etc.)

Tracker Specification

Part Numbers 99-0401; 99-0422 with Workstation software
Number of Voltages plus values 6 voltages: 200mV, 3V, 5V, 10V, 15V, 20V
Number of Resistances plus values 9 resistances: 10Ω, 50Ω, 100Ω, 500Ω, 1kΩ, 5kΩ, 10kΩ, 50kΩ and 100kΩ
Number of Frequencies plus values 6 frequencies: 20Hz, 50Hz, 60Hz, 200Hz, 500Hz and 2kHz
Range Selection Manual or use Auto Scan; Optional Software control
Front Panel Connections Banana jacks for A/B Test channels and Common
DC Voltage Source for testing gated devices Variable voltage from 0 to 10VDC; 200mA max.


Included Accessory Part Number

MP20 Microprobes Part number 98-0249
Manual on CD Part number 06-5217
2 Common leads Part number 98-0043
Shrouded test lead (blue) Part number 98-0284
Power cord Part number 98-0015
USB Cable (Included only when purchased with Workstation Software) Part number 98-0683
Huntron Workstation software (if purchased) Part number 06-5228

Optional Accessory Part Number

Footswitch Image Part number 98-0315
Travel Case for Tracker 2800 Part number 98-0524
Huntron ASA Training Course Part number 98-0515
ASA Training Accessory Kit Part number 98-0678

Tracker 2800 FAQ

Q: Can the Tracker 2800 be used with the Workstation software?

Answer: Yes. The Tracker 2800 can be used with the Huntron Workstation software. The Tracker connects to the PC through a USB port on the back panel. The software is optional and needs to be purchased in addition to the Tracker.
The Workstation software lets you capture and store Tracker signatures on a circuit board so they can be used for comparison when troubleshooting bad boards. Go to the Workstation software web page for more information.

Q: What are the primary differences between the Tracker 2800 and the Tracker 3200S?

Answer: The Tracker 2800 and the Tracker 3200S are very similar in overall function but their purposes are different.
The Tracker 3200S is designed to be connected to optional automation hardware such as Access Probers.
The Tracker 3200S includes the Workstation software where it is optional with the Tracker 2800.
The Tracker 3200S has front panel scanning connectors used with custom cables or DIP clips.
The Tracker 2800 has a scaled down selection of ranges since front panel push buttons are used for setting range combinations.
The Tracker 3200S has the full compliment of ranges available with Huntron Workstation.

Q: Can the Tracker 2800 be used with an Access Prober?

Answer: No. The Tracker 2800 can be used with the Huntron Workstation software but otherwise is a stand alone instrument.
The Access Probers can be connected to the Tracker 3200S, the Tracker Model 30 or the TrackerPXI.

Q: My Tracker 2800 does not have a USB port. Can it be upgraded?

Answer: Possibly. Contact CTS directly to discuss upgrade options.

Q: I love my Huntron Microprobes. Can I get them directly from Huntron?

Answer: Yes. The part numbers to use for ordering Huntron MP10 or M20 Microprobes are 98-0078 (MP10 standard banana jack) and 98-0249 (MP20 shrouded banana jack). Huntron Microprobes can be purchased through CTS.

Additional information


Product Code