Huntron: Huntron Workstation Software License

Workstation Software license for Huntron trackers, access probers and DH2



Powering Huntron Trackers, Access Probers and more

The Huntron Workstation software is the power behind the industry standard Huntron Trackers and Access Probers. The design is straightforward and easy to use yet robust and flexible enough to meet your most demanding test needs. Huntron Workstation’s goal is to provide a model driven platform that allows you to organize your test procedure, execute your test in a repeatable process and interpret the results quickly. The procedures are comparison based where stored information from working test assemblies is matched against information gathered from suspect assemblies and the results presented to you in an organized visual display.

Huntron Workstation Highlights

• Supports Tracker 3200S, Tracker Model 30, Tracker 2800/2800S, Huntron ProTrack (USB only)
• Automate the Capture and Storage of Electronic Test Measurements
Huntron Workstation software is now extended to the automation of benchtop digital multimeter (DMM), oscilloscope and spectrum analyzer measurements
Capture measurements, compare to either a stored measurement or against a defined value and view the results of your test
Currently supported instruments:
– B&K Precision 2841 DC Resistance Meter (milliohm 4 wire measurements)
– Agilent/Keysight 34461A DMM (general purpose benchtop digital multimeter)
– Agilent/Keysight 34410A DMM (general purpose benchtop digital multimeter)
– Tektronix 4050 DMM (general purpose benchtop digital multimeter)
– Agilent DSO1022A oscilloscope (compact 200MHz digital oscilloscope)
– Keysight DSOX2022A oscilloscope (compact 200MHz digital oscilloscope)
– Keysight N9935A spectrum analyzer (used with Access RF)
– Keysight N9938A spectrum analyzer (can be used with Access RF)
– Rohde&Schwarz FSH4 spectrum analyzer (can be used with Access RF)
Most of your DMM, oscilloscope and spectrum analyzer measurement functions are supported within the software.
For more information, download the Using a DMM with Huntron Workstation white paper
• Access DH2 50 mil and 39 mil probe-to-probe spacing enabled
• Image based work directions can be embedded into Board, Sequence and Components level Instructions
• Windows 7, 8 and 10 compatible
• Supports conversion of all 3.X and 4.x databases including HBK files
• Built-in Utility for updating Tracker Model 30, Tracker 2800/2800S and Tracker 3200S firmware
• See the Workstation FAQ below for more details on the latest release

Huntron Workstation Tour

The Huntron Workstation Software is designed to bring a high level of efficiency and flexibility to board test creation and troubleshooting. The multiple pane layout of Huntron Workstation allows for fast test creation, quick viewing of component signatures, control of robotic probers and CAD viewing tools that update on the fly.

Huntron Workstation Slide Show
You can view an image based tour of Huntron Workstation by clickng the image to the left. The images will pop up into an on-screen slide show. Use the ARROW buttons that appear on each side of the displayed image to move forward or backwards through the slideshow. Descriptive captions will appear below each image.

Huntron CAD Import Tools

If you have CAD layout files available for the circuit boards you troubleshoot with your Huntron system, Huntron CAD Tools are a valuable, time saving, test creation utility when compared to manual test development.

Add Huntron® CAD tools to the Huntron Workstation software to enhance test building and fault isolation. Huntron Workstation uses the Unisoft ProntoVIEW-Markup software to convert PCB layout files into a standard XML file for import into the Huntron Workstation software.

The full ASCII layout file exported from your CAD layout package is opened in Unisoft ProntoVIEW-Markup where Prober alignment points can be selected. An XML file is then created and exported by Unisoft Pronto VIEW-Markup. The Huntron Workstation CAD Import feature builds tests in the Huntron Workstation software from the XML file created from Unisoft ProntoVIEW-Markup. This process adds Sequences to the Board database for each side of the PCB (Top and Bottom). The CAD Import wizard also provides net prioritization, preferred board side, Huntron Prober slot selection and optimization steps for Huntron Access DH (dual head) Probers.

Two Test Types are supported. The Component Test Type creates a component for each component listed in the XML file including all of the pin information. The NET Test Type creates “nets” of up to 2048 Nodes (pins) with each pin being an access point on a net.

For more information and a basic list of supported CAD packages, download the CAD Tools datasheet.
Video on Huntron YouTube Channel: How to – Import CAD Data into Workstation 4.3

Not every type of CAD file can be used to create a test in Huntron Workstation. Pin X/Y, Net and Trace data is required. For detailed information about each supported CAD package including a file type breakdown visit this support page on the Unisoft website: CAD and Gerber Files Listings

About Huntron Workstation Annual Maintenance License

Huntron strives to provide the best possible software for the control of your Huntron hardware. Huntron charges a nominal fee for the continuation of support and software updates. The first year Maintenance is included with the purchase of software controlled products from Huntron or a Huntron authorized source. After the first year, the annual Maintenance fee must be paid to obtain access to software updates. The Huntron Workstation software will automatically prompt you when the current Maintenance is about to expire or has expired. Huntron Workstation will continue to function normally even if your Maintenance is expired. Versions of software created after the expiration date will not run without a renewed Maintenance agreement.
The Maintenance fee is due annually from the date of purchase. This means that after the expiration date a full software license will need to be purchased to use any newer version of Huntron Workstation.
We strongly recommend that you keep your Huntron Workstation Maintenance current to avoid additional costs and take advantage of the latest Workstation updates and enhancements. To find your Workstation expiration date, go the Workstation Help Menu, select “About Huntron Workstation” and note the expiration dates in the Enabled Features field. You can also contact Huntron directly for expiration date information and to obtain pricing.

Huntron Workstation Maintenance Part Numbers
– 98-0462 One Year Maintenance for Tracker 2800/2800S – BUY NOW!
– 98-0467 Two Year Maintenance for Tracker 2800/2800S (save about 30% compared to one year cost) – BUY NOW! (Select the 2 Year option)
– 98-0740 Three Year Maintenance for Tracker 2800/2800s (save about 40% compared to one year cost) – BUY NOW! (Select the 3 Year option)
– 98-0745 One Year Maintenance for Tracker 3200S,Tracker Model 30, ProTrack Model 20 – BUY NOW!
– 98-0746 Two Year Maintenance for Tracker 3200S,Tracker Model 30, ProTrack Model 20 (save about 35% compared to one year cost) – BUY NOW! (Select the 2 Year option)
– 98-0747 Three Year Maintenance for Tracker 3200S,Tracker Model 30, ProTrack Model 20 (save about 48% compared to one year cost) – BUY NOW! (Select the 3 Year option)
– 98-0466 One Year Maintenance for Tracker and Access Prober system – BUY NOW!
– 98-0468 Two Year Maintenance for Tracker and Access Prober system (save about 40% compared to one year cost) – BUY NOW! (Select the 2 Year option)
– 98-0741 Three Year Maintenance for Tracker and Access Prober system (save about 50% compared to one year cost) – BUY NOW! (Select the 3 Year option)
– 98-0605 Workstation 4.3 License for Tracker 2800/2800S – BUY NOW!
– 98-0748 Workstation 4.3 License for Tracker 3200S, Tracker Model 30, ProTrack Model 20 – BUY NOW!
– 98-0463 Workstation 4.3 License for Tracker and Access Prober system – BUY NOW!

Recommended Controller (PC)
• PC with multi-core processor; Intel i7 or similar recommended
• Microsoft Windows 10 (64 bit)
• Solid State hard drive
• 8GB RAM or higher
• 1920x1080px video resolution (dual monitors if used with CAD Tools)
• DVD drive
• Keyboard and mouse
• Internet connection
• Available USB port or two USB ports if used with Tracker and Access Prober combination

– TrackerPXI, Probers with PCI based camera cards and ProTracks with parallel interface are not supported with Workstation 4.3

Huntron Workstation 4 FAQ

Q: Where can I download the latest version of Huntron Workstation®?
Answer: The latest version of Huntron Workstation as well as older 4.X versions can downloaded from the Software web page.

Q: What are the differences between Huntron Workstation 4.2 and 4.3?
Answer: Huntron Workstation 4.3 uses a different database format that requires 4.2 tests to be converted before they can be used in 4.3. The original 4.2 file will not be changed. Here is a more complete list of the major enhancements:
– New Database format with increased read speeds and no limit on file size
– Supports conversion of all 3.X and 4.x databases including HBK files (version 2 and 3 backup files)
– Access DH2 Prober support
– Tracker Model 3200S Support
– Access RF Prober support
– Access DH/DH2 50 mil and 39 mil probe-to-probe spacing enabled
– Image based work directions can be embedded into Board, Sequence and Components level Instructions
– Enable/Disable testing of individual Components
– Support for Windows 10; No longer tested in Windows XP or Windows 7
– Built-in Utility for updating Tracker Model 30, Tracker 2800/2800S and Tracker 3200S firmware
– Component Level Group Edit that allows for copying Component settings to other selected Components including Access DH/DH2 Z1 and Z2 positions
– Pin Offset feature for moving robotic probe positions away from component bodies
– Support for ProntoVIEW Markup CAD data import software from Unisoft; CAMCAD Professional not supported
– Improved CAD Import process with additional controls to customize the import

Q: I am new to Huntron Workstation®. Where do I start?
Answer: The best way to get started is by viewing the software tutorials included with the software package.
Version 4 software includes Software and CAD Import tutorials with the installation. These tutorials are also available on the Huntron Training web page.
It works best to print these tutorials for easy reference. For additional assistance, contact Huntron Technical Support.
Also check out the Huntron YouTube channel for Workstation video demonstrations (link at the top of the page).

Q: How do you store multiple signature sets for a component?
Answer: Huntron Workstation 4 allows for any signature scan to be set as a “Reference” and used for comparison. This could be used to store References from several known good PCBs. This can be extremely useful when dealing the differences in signatures from different IC manufacturers. Simply click the Set Reference button in the Signatures/Troublesheet tab after scanning or select the Reference check box in the Tree/Component (or Net) Scans tab.
Although it is a legacy feature carried over from older Workstation versions, Version 4 also has the ability to create a Merge signature set by clicking the Merge button in the Signatures/Troublesheet tab after scanning. The Merge function creates a listing in the Component (or Net) Scans tab called Min/Max in addition to any scans set as a Reference.
To control which signatures are used for comparison, set the Compare Priority setting by selecting Tree pane/Sequence tab and scroll right to the Compare Priority column.

Q: What can be done to a board test to shorten the test time?
Answer: The most beneficial method is to reduce the number of test points by creating a “net” test or testing only the unique nodes on the circuit. This eliminates any redundant re-testing of component pins. Generally, CAD data or schematics are necessary to create a net test.
Other things that can be done to reduce test time is to decrease the number of test ranges used (though we recommend using at least two), disabling the “Z Home between Components” in the Sequence settings and grouping small discrete components into one component test. Increasing the test range frequency to 200Hz or higher will also result in shorter test times.
More suggestions such as probe position optimization are available in the Technical Support Quick Tips

Q: What is Tolerance and how is it calculated?
Answer: The Workstation software allows the user to set a tolerance used when comparing stored good versus bad signatures. It is set on scale from 0 to 99 with 99 allowing the greatest difference between signatures.
Tolerance as it relates to the Huntron software can sometimes be difficult to explain but here is our best short explanation.
The software samples a single cycle of the applied sinewave regardless of frequency. For signature creation, sine information for both the voltage (horizontal) and current (vertical) are examined but only the horizontal data is used when comparing. We digitize these waveforms by plotting 100 locations across the entire waveform cycle. These points are the byte location. We then look at the location of where the waveform crosses through a particular byte location and assign it a number (referred to as a signature point). This signature point will be positive or negative depending on it’s location within the byte location and can be 0-99*. The tolerance is the number allowed for a compared signature point to be “different”. For example, your tolerance is set to 5. If the STORED signature point in byte location 10 is “20” and a compared signature point for the same byte location is “30”, then the signature would fail because the difference between stored and compared is 10. If the compared signature point was 25, then it would pass. When viewing signatures in the Zoom mode or in the Troublesheet, the deviation (the Dev number) is how different the compared signature point is from the stored signature point minus the tolerance for the largest difference on that waveform. So essentially, the Dev number is the amount you would need to add to the tolerance to get a PASS result. The Area number is the sum of all deviant signature points and is used for sorting the failed signatures. In the Signature window, right-click the signature box and select Data from the menu to see the actual byte and signature (data) point information. This may help visualize how we derive the signatures.
Voltage amplitude could be related to the signature but this would relate only to the horizontal signature information. For a Tracker range amplitude of 1Vpk, each signature point would be 1/100th of a volt making a signature point worth approximately .01V. This would mean that a tolerance of 5 would allow the horizontal voltage amplitude to differ by up to .05V. With this analogy, you can see why the tolerance is sometimes related to a percentage.
* Note: Data byte values can exceed 99, but normal full scale is 100. Values like 101 or 102 (mostly on capacitors) could be displayed and it is possible for values up to 127 but this means that the voltage has exceeded the voltage output by the Tracker.

Additional information


Product Code