Description
KT 644 High Voltage Tester enabling high flexibility in a compact package
- Easy operation via PC with comprehensive control software via “NT Control”
- Extensive result reporting to file, to printer or via database connection*
- Extensive GUI display possibilities and tools for fault location in the unit under test [UUT]
- Up to 512 test points
- High current test up to 2 amps dc
- High voltage test 1500 V dc
- Dielectric strength test (DWV) up to 1050 V ac / 1500 V dc
- Remote maintenance
Small dimensions – Big productivity
The KT 644 for well-focused dedicated applications with up to 512 test points
- Low start-up investment costs as well as low ongoing cost.
- Easily expandable*:
- Additional measurement electronics (AC/DC)
- LCR measurement bridge
- Test point expansion via test point units (TPU’s)
- Four-wire measurement from 100 µOhm upwards
- Insulation tests up to 10 G Ohm as standard
- Automatic, harness test table support
The high reliability of the Adaptronic test and adapter systems, combines with CTS’s fast customer oriented response with over 30 years of experience makes a convincing contribution to the quality assurance of your products.
KT 644 Options
Measurement electronics expansion; to the base specification, MT20 up to 25 VDC / max. 25 mA
- Measurement electronics:
- MT40-40 – up to 40 v DC / max. 100 mA
- MT40-250 – up to 250 v DC / max. 10 mA
- MT1500DC – up to 1500 v DC / max. 2 A
- High voltage insulation test / high current continuity test (optional up to 40 VDC / 10 A pulsed)
- MT2000
- up to 1050 v AC
- up to 1500 v DC
- Dielectric strength test, max 3 mA or 6 mA
- Internal AC measurement bridge MT_LCR for the test of inductance, capacitance and resistance.
- Voltage measurement device MT_EXT for voltage measurement up to 700 VDC & 500v AC (max. 400 Hz)
- Four-wire (Kelvin) measurement for measuring low resistance from 1 m Ohm or 100 µOhm
Function test
- Stimulus cards
- Stimulus sources
- Test and programming of single-wire devices
- Total integration of camera systems for visual tests
- ProfiNet, LIN-, CAN-, Mod-Bus TCP, other bus systems on request
Elaborate number of interfaces
- Digital inputs and outputs 24 V
- Interface for test point units (standard)
- Extern Interface (standard)
- Safety loop (standard) etc
NT Control test and programming software
- Graphic user interface with clear test display
- Operating buttons, test status, statistics
- In the error case display as error list or single error
- Editors for net lists, link lists, insulation point lists (prim lists) and component lists, function test editor
- Easy realisation of special test procedures
- Comfortable multimeter function
Open Wire Probe
- Intelligent pin number probe
- Test point display
- Status display
- Operation modes automatic and manual
Operating and display options
- Foot switch option for test start
- Warning lamp for high voltage tests
- Test result lamp – Pass/Fail
Temperature and humidity logging
- Combined temperature and humidity sensor
- Interface at the NT 644
- Temperature and humidity available in NT Control
Comprehensive possibilities of interface boards and adapter cables
- Interface boards for the adaption of the adaptronic interface to customer’s existing adapter cable connector systems
- Adapter cables with adaptronic standard interfaces, open cable ends for the adaption by the client or application specific special adapter cables
Additional services
- Training for programming and testing with NT Control and NT 644
- Calibration service
- Application specific assistance
Support / Service / Calibration
- Programming / Fixturing services available
- Calibration service – both on-site and back to base at CTS
- Application specific assistance
- The high reliability of the Adaptronic test systems, combined with CTS’ fast customer oriented response with over 30 years of experience makes a convincing contribution to your business.
