GW Instek: LCR Meter High-Frequency 10Hz~30MHz

Wide Test Frequency 10Hz ~ 30MHz, 6 Digits, LCD color Display, 0.08% Basic Accuracy

Description

LCR-8200 High-Frequency LCR Meter

LCR-8230 DC, 10Hz ~ 30MHz High-Frequency LCR Meter

Features

• Wide Test Frequency: DC, 10Hz ~ 30MHz/20MHz/10MHz/5MHz/1MHz
• 7” LCD color Display
• 0.08% Basic Accuracy
• Displaying Four Measurement results simultaneously from 17 selectable measurement parameters freely
• 15 steps List Measurement
• Two Curves Sweep Mode
• Internal DC Bias Voltage ±12V
• USB Storage available
• ALC function available
• Standard Interfaces : RS-232C, USB host/device, LAN, GPIB and Handler
• Universal power input

Description

GW Instek launches a new series of high-frequency LCR meter ~ LCR-8200, which has five models and the maximum test frequency is up to 30MHz. The entire series adopts 7-inch color display and features a high measurement accuracy (0.08%). The measurement results can be presented numerically or graphically according to the selected measurement mode, allowing users to optimally interpret the characteristics of the DUT. At the same time, a full range of standard interfaces such as USB device / RS-232C / Handler and GPIB allow users to control the instrument by the most familiar interface without worrying about additional hardware investment costs. Furthermore, the series also provides USB storage function when operating in the graphics mode. The measured characteristic curves and values of the DUT are saved for subsequent analysis. The wide variety of features of the LCR-8200 can help users easily respond to the test requirements of passive components in R&D, engineering, and production.

Accessories

Included Accessories
Safety Sheet x1, CD x1 (User manual), Power cord x1, LCR-06B x1

Option
LCR-DB1 DC Bias box (Freq. upto 2MHz / max. input voltage +/- 200V)

Optional Accessories
Accessory Model Brief Description LCR-8205
LCR-05A Test Fixture for axial & radial leaded components (up to 30MHz) V
LCR-06B Test Lead with Kelvin clip (4 wire type) –
LCR-07 Test Lead with Alligator clip (2 wire type) –
LCR-08 Test Fixture (Tweezers) for SMD/Chip components –
LCR-10A Test Fixture for Bottom Electrode components (up to 30MHz) V
LCR-12 Test Lead with Kelvin clip (4 wire type) –
LCR-15A Test Fixture for SMD/Chip components (up to 30MHz) V
GTL-234 RS-232C Cable V
GTL-246 USB Cable V
GTL-248 GPIB Cable V

Note ” △ ” means the accessories work with a frequency limitation

Additional information

Manufacturer

Product Code

Downloads

View Brochure

View Datasheet

View Manual