GW Instek: RF & Spectrum Analyzer Training System

£441.88

GW Instek GRF-1300A RF and Communication Trainer

Categories: , , SKU: GWI00156

Description

GRF-1300A RF and Communication Trainer

Features

•Baseband Signal: Sine, Triangle, Square wave
•Frequency Range: 0.1 ~ 3MHz
•RF Frequency: 870 ~ 920MHz
•AM & FM Modulation
•Mixer & 2.4GHz Bandpass Filter
•5 programmable On/Off Switches and 5 Test Points to Simulate 8 Failure Conditions for Trouble-Shooting Study
•USB Interface to Provide Remote Control

Description

GRF-1300A, as an optional accessory of GSP-730, is a trainer for basic RF communications experiments.

The brand new GRF-1300A RF training kit features not only all functions of GRF-1300 RF training kit but also augments itself with Mixer and Bandpass Filter. Users can better understand the characteristics of Mixer and Bandpass Filter by operating scalar network analyzer measurement which is produced by combining GSP-730 spectrum analyzer, GRF-1300A RF Communications Trainer, and USG signal generator.

The combination of USG signal generator and GRF-1300A Mixer function can produce 2.4GHz AM and FM modulation signals. GRF-1300A Bandpass Filter can purify the output signals by filtering out harmonic and spurious produced by Mixer output signals

Accessories
Quick Start Guide
CD (User Manual/ Programming Manual)
Power Cord
PEL-011 Load Input Terminal Cover
PEL-012 Terminal Fittings Kits
PEL-013 Flexible Terminal Cover
PEL-014 J1/J2 Protection Plug
Front Terminal Washers
GTL-255 Frame Link Cable 300mm

Optional Accessories
CR123A 3V Lithium Battery for Clock.
GRA-413 Rack Mount Bracket for Booster PEL-3211(H) (EIA+JIS)
GRA-414-E Rack Mount Frame for PEL-3021(H), PEL-3041(H), PEL-3111(H)/EIA
GRA-414-J Rack Mount Frame for PEL-3021(H), PEL-3041(H), PEL-3111(H)/JIS
GTL-248 GPIB Cable, 2.0m
GTL-246 USB Cable Type A- Type B
PEL-010 Dust Filter
PEL-004 GPIB Option
PEL-005 Connect Cu Plate
PEL-006 Connect Cu Plate
PEL-007 Connect Cu Plate
PEL-008 Connect Cu Plate
PEL-009 Connect Cu Plate
PEL-018 LAN Card

PEL-3212H (800V/ 105A/ 2100W) Single-Channel Programmable D.C. Electronic Load

Features
• Operating voltage (DC):0~150V(PEL-3000)/ 0~800V(PEL-3000H)
• Operating Mode : C.C / C.V / C.R / C.P / CC+CV / CR+CV / CP+CV
• Parallel Connection of Inputs for Higher Capacity (Max : 9,450W)
• Support of High Slew Rate:Max. 16A/us((PEL-3000)/ 0.84A/us(PEL-3000H)
• Run Program Function(GO/NO GO Test)
• Sequence Function for High Efficient Load Simulations
• Dynamic(Switching) Function:0.0166Hz ~20kHz
• Soft Start Function:Off / On(1~200ms, Res:1ms)
• Adjustable OCP / OVP / OPP / UVP Setting
• Short Circuit Function
• Timer function : Elapsed Time of load on
• Cut Off Time(Auto Load Off Timer ):1s to 999h 59min 59s or Off
• External Channel Control / Monitoring via Analog Control Connector
• Setup Memories:100 sets
• 3.5 Inch TFT LCD Display
• Multi Interface : USB 2.0 Device / Host , RS-232 , GPIB / LAN (Optional)

Description

The PEL-3000 series, a single-channel, programmable D.C. electronic load with 0.01mA current resolution and 16A/μs current Slew Rate, is very ideal for testing server power supply and SPS (Switching Power Supply) for commercial and industrial computers. For a heavy-duty device like cloud ecosystem running 24-hour nonstop operations, a stable and high-power power supply, ranging from 175W to 1050W, is required to maintain the normal operation of server, Hub, and the equipment of data storage and internet communications. Owing to the increasing demand of data transmission and large scale data storage of telecommunications systems, the infrastructure of internet communications is in the pace of rapid expansion. This has greatly boosted the market demand of telecommunications equipment powered by power supply of 2000W and above. The flexible power combination of PEL-3000 meets the test requirements of present high-power power supply.
The PEL-3000H programmable DC Electronic load, which not only inherited functions and features from the PEL-3000 series but providing three current ranges for all PEL-3000H series and adding voltage monitor BNC terminals on the front panel. The PEL-3000H series, a single-channel, programmable D.C. electronic load with 800V and 0.84A/μs current Slew Rate, is ideal for the test of the high voltage devices such as the EV & HEV in-vehicle chargers, DC/DC converters or high-voltage batteries.

GRF-1300A, RF and Communications Trainer

Standard Accessories
Experiment Text Book, Student Version x1, Power Cord x1, CD-ROM with PowerPoint file and Primary RF Software x1, RF Cable x6, Antenna x2, N to SMA Adapter x1

Optional Accessories

GBK-002, Experiment text Book, Teacher Version
USG-LF44, RF Signal Generator

Standard Accessories

USB cable x1, CD-ROM with USG software, Primary RF software and User Manual x1

Free Download

Primary RF, Remote Control Software
USG Java program

Additional information

Manufacturer

Product Code

Downloads

View Datasheet

View Manual